What you need:
- Spirit level (or a good eye😉)
- screwdriver
- drill
Step 1:
Please leave the protective film on the calendar until step 4 for protection. Hold your calendar with the side of the protective film straight against the desired spot on the wall so that no scratches can occur. Use a spirit level to check whether it is sitting straight.
Step 2:
Use a pencil to draw a point exactly in the middle of the 4 holes so that you know where to drill later.
Step 3:
Then drill a hole at each of the four markings and then use a hammer to hammer the included plastic dowels into the wall so that they no longer protrude.
Step 4:
Remove the foil on the printed side!
Step 5:
Unscrew the supplied wall brackets.
Step 6:
Screw the back of the spacer into the wall using the screw provided.
Step 7:
Attach the calendar to the wall, aligning the holes in the wall with the holes in the spacers.
Step 8:
Now screw the front of the spacer through the calender holes.
Step 9:
Repeat this process for all corners
And done 😍